Macsense Connectivity MPC-200 Manual do Utilizador descarregar pdf (Página 6)

4. Select Device Manager, click PCMCIA

socket

, then select one CardBus controller

and click Properties .

5. Click Driver, and select Driver File Details

...

6. CBSS.VXD will be found and its version must be 4.10.1387 or later.

If your CardBus driver is older, please contact your Windows 95 supplier for updating

to the latest version.

After getting the correct version, just follow these steps to get up and running:

1. Start the computer.

2. Insert the Fast Ethernet CardBus Card into a PC Card slot in your computer. Make

sure the card is securely inserted into the socket. Windows will display the Update

Device Driver Wizard dialog box. Click next, select Other Locations button and

key in A:/ in the location, where the device information file (.inf file) can be found.

Insert Ethernet Driver Diskette into driver A and click OK. Windows will find the Fast

Ethernet CardBus Card.

3. Click Finish to start installing the necessary drivers.

4. Follow the instructions of Windows 95 to install the Ethernet Driver Diskette in

drive A and Windows 95 CD-ROM in CD-ROM driver.

5. After installing the desired drivers, the Ethernet adapter will be enabled, and the

LED indicator will be turned on if network is available.

Setup for Windows 98

In the case of Windows 98, you do not need to check the version of your Operating

System. Windows 98 supports CardBus drivers for many kinds of CardBus controllers and

drivers for the Digital Semiconductor LAN Controller 2114x family. Taking the advantages

of these new characteristics and the Plug & Play feature, you can simply hot plug your

Fast Ethernet CardBus Card into the CardBus socket of your notebook and follow the

instructions showed on the screen to finish the installation process. As the manufacturer of

this Fast Ethernet CardBus Card, we do know some notebook computers have problems

to drive this card by using the driver that come with Windows 98. But mostly they could be

solved by upgrading this card driver to one supplied in you driver diskette.

Upgrading steps:

1. Start the computer.

2. Insert the Fast Ethernet CardBus Card into a PC Card slot in your computer. Make

sure the card is securely inserted into the socket. Double-click the System icon

from the Control Panel. Select Device Manager, then double-click PCI Fast

Ethernet DEC 21143 BASEd Adapter from Network adapters

and select Update

Driver from PCI Fast Ethernet DEC 21143 Based Adapter Properties.

3. Windows will display the Update Device Driver Wizard dialog box. Click next. Then

select Display a list of all the drivers in a specific location

, so you can select

the drive you want

. Click next. Then, Windows will display the Select Device dialog

box. Click Have Disk and then key in A:/ for the location of where the device infor-

mation file (.inf file) can be found. Insert the Fast Ethernet CardBus Card Driver

Introduction

1 2 3 4 5 6 7 8 9 10 11 ... 42 43

Comentários a estes Manuais

Sem comentários

Macsense Connectivity MPC-200 Manual do Utilizador Página 6

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Macsense Connectivity MPC-200